banner
 
Products
Home Aerosol Machinery

Water-bath Leakage Tester

AWT-2500 Water-bath Leakage Tester
 
 

AWT-2500 Water-bath Leakage Tester

AWT-2500 Automatic Water-bath Leakage Tester is used for detecting various aerosol products, not limited by can body materials, The machine(CE-Proved ) adopts explosion proof motor and is equipped

  • Warranty:

    14 Months
  • Port:

    Ningbo/Shanghai/Guangzhou
  • Packaging Details:

    Wooden Case
Product Details

Description:
AWT-2500 Automatic Water-bath Leakage Tester is used for detecting various aerosol products, not limited by can body materials, The machine(CE-Proved ) adopts explosion proof motor and is equipped with automatic overload breaker to guarantee safety operation.

Working process:
The whole process including: electric heating, temperature-control, automatic clamping,checking, drying, conveying.


When cans entering, the clamp of water-bath tester will hold the can, then put can into hot water at temperature between 45 and 52 for about 3 or 5 minutes, to check whether it is leaking. Then can will go into wind blowing system, hot wind will dry the can body and convey it to conveyer.
 
Features
Used to testing all kinds of aerosols without limit of can materials.
Production capacity up to 70 CPM,and the products can be 100% tested.
Adopt explosion-proof motor equipped with automatic overload separator, assure safe operation of the complete machine.
The explosion proof electric tubes installed in the water tank can quickly heat the water to the requirement water temperature and automatically control the temperature. 
The chains used in the machine are made of stainless steel and the chucking appliance for hanging is fixed firmly, avoiding the danger of becoming loose and falling off.
The machine is also equipped with an automatic blowing .
The submersion clip design allows you to easily see a leaking valve cup while the can is totally submerged.
It is available for 1" valves. 


Options 

Water bath Hot Wind drying system

Simple Safety Net Cover (Stainless Steel)

Safety outside guarding frame with organic glass 


Technical Specifications

Model AWT-2500
Production capacity 3000-4200 cans/hr
Main driving head power 1.1KW
Water heating power  33KW
Type of electric control box and heater Explosion-proof
Temperature control accuracy ±1℃ 
Air source 0.6Mpa-0.8Mpa clean and stable air source
Maximum air consumption 0.6m3/min
Drying Air Pressure 0.3-0.6 Mpa

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

 
related products
AWT-3500 Water-bath Leakage Tester
AWT-3500 Water-bath Leakage Tester

WT-3500 Automatic Water-bath Leakage Tester is used for detecting various aerosol products, not limited by can body materials, The machine(CE-Proved ) adopts explosion proof mot

Drying System To Work With Water Bath
Drying System To Work With Water Bath

The machine adopts a heating fan, and USES 4 blowing outlets to blow water away, make sure the can body are fully dried before get into next working station.

Automatic High Speed Aerosol Can Leak Detectors
AWT-3600 High Speed Water-bath Leakage Tester

AWT-3600 Automatic Water-bath Leakage Tester is used for detecting various aerosol products, not limited by can body materials, The machine adopts gas detector and explosion proof motor to work up to 7,200 cans an hour.

AS-2B Semi-auto Bag-on-valve Aerosol Filling Machine
AS-2B Semi-auto Bag-on-valve Aerosol Filling Machine

It’s suitable for can diameter ranging from 35mm to 65mm, can height ranging from 80mm to 330mm, 1” international standard bag on valve aerosol valve.

AV-50 Automatic Aerosol Valve Inserter
AV-50 Automatic Aerosol Valve Inserter

AV-50 Automatic valve inserter it is supporting equipment of the automatic aerosol filling and sealing machine which is used for feeding and placing the valve to the can automatically.

AWP-100 Automatic Actuator Placer
AWP-100 Automatic Actuator Placer

AWP-100 Automatic Actuator Placer is equipped with 108L hopper, vibration sorter, 6 rotating working station. Control system adopts Siemens core, achieve that machine shut down when no actuators or no cans or cans full.

30 to 50 cpm Aerosol Filling Line
30 to 50 cpm Aerosol Filling Line

30 to 50 cpm Aerosol Filling Line is  consists of Aerosol Can Feeding Table-AF-50B Automatic Aerosol Filling Machine-Aerosol Valve Inserter-AWC-60 Aerosol Can Checkweigher-AWT-2500 Water-bath Leakage Tester-AWP-60 Automatic Actuator Placer-ACP-60 Automatic Cap Presser and ink jet printer etc.

High-speed Aerosol Filling Machine
AFS-120 High-speed Aerosol Filling Machine

AF-120 High-speed Aerosol Filling Machine is combined pneumatic control and electrical control, Regarding central control, the functions are as below. 15" touch screen & PLC by Siemens.Can feeding & conveying are controlled by Schneider frequency converter.

© Copyright: 2021 Aerosol Machinery Equipment Co.,Ltd All Rights Reserved.

IPv6 network supported

Friendly Links :

Filling Machine Supplier
top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.