Water Test Bath For Aerosol

Description: 
AWT-3600 Standard design for containers with 1" valves.

This is a rotary machine intended for the burst test of rigid containers for aerosols.
The machine body consists of a frame in guarded steel with stainless steel panels AISI304. Inside the guarding, there are the inverter electrical motor and the pneumatic system, which moves the star wheel.
Our aerosol test bath comprises of a continually rotating turret which transfers aerosols off the transport conveyor and attaches them to a chain of clips. This chain carries the aerosols through a temperature regulated water trough (known as an aerosol waterbath) and then back to the turret, where air knives remove any residual water before returning the aerosols to the conveyor. People who oversee this role are known as aerosol can burst pressure testers.
The size of the water trough is dependant upon the speed of the line – the aerosols are required to be immersed in the aerosol test bath for a minimum of 3 minutes to allow the aerosol container to reach a temperature of 50°C in the aerosol waterbath.
It has a 16 positions, rotating star wheel that thanks a plastic clips, can take cans with a maximum diameter of 66mm and bring them in to the hot water tank. On the table of the machine, there are fixed columns with manual adjustable supports for an easily change of the set up of the machine.
The machine is arranged by an air blow system to dry the can after testing and before they come back to the conveyor chain of the line.
There are transparent doors that surround all of the moving parts that may be dangerous to the operators. If any door is opened by an operator, the machine stops.
The machine is designed and manufactured to be extremely versatile, as well as extremely reliable and safe.

Features
Used to testing all kinds of aerosols without limit of can materials.
Production capacity up to 120 CPM,and the products can be 100% tested.
Adopt explosion-proof motor equipped with automatic overload separator， assure safe operation of the complete machine.
The explosion proof electric tubes installed in the water tank can quickly heat the water to the requirement water temperature and automatically control the temperature. 
The chains used in the machine are made of stainless steel and the chucking appliance for hanging is fixed firmly, avoiding the danger of becoming loose and falling off.
The machine is also equipped with an automatic blowing .
The submersion clip design allows you to easily see a leaking valve cup while the can is totally submerged.
It is available for 1" valves. 

Options 

Water bath Hot Wind drying system

Simple Safety Net Cover (Stainless Steel)

Safety outside guarding frame with organic glass 

Technical Specifications